TAM 00682 2
DSC 045-100 07 / 2012
Three-phase synchronous motor English
LEGAL NOTES ON DOCUMENTATION
Copyright
This documentation may only be copied, as many times as required, by the owner for
internal use. For other purposes, this documentation may not be copied or duplicated either
in whole or in part. Utilization by and provision of the contents to third parties is not
permitted. Names and company logos used in this documentation may be trademarks,
whose use by third parties for their own purposes may infringe the rights of the owner.
Applicability
This documentation is part of the unit/the machine. These Commissioning and Maintenance
Instructions must be available to the operator at all times and be in a readable condition.
If the unit/machine is sold or put into storage, the owner must pass on this documentation
together with the unit/machine. Following the sale of the unit/machine, this original and all
copies are to be passed on to the purchaser. Following disposal or any other form of
termination of utilization, this original and all copies are to be destroyed.
With the introduction of this documentation, corresponding documentation with earlier issue
dates is superseded.
Please note that all data/figures/information represent current data at the time of going to
press. These details are not legally binding for the purposes of dimensioning, computation,
or calculation.
Baumüller Nürnberg GmbH reserves the right to change the technical data and the method
of operation of Baumüller products in the context of the further development of the products.
No liability can be accepted concerning the correctness of this documentation unless
otherwise specified in the General Conditions of Sale and Delivery.
BAUMÜLLER NÜRNBERG GmbH
Motors division
90482 Nürnberg, Germany
www. baumueller.de
To Next Page
Loading...
Need help?
General
