Baumuller DSC Series User Manual

TAM 00682 8
DSC 045-100 07 / 2012
Three-phase synchronous motor English
2.4 Technical data
Built class (EN 60034-7) IM B5 installation position horizontal
IM V1 installation position vertical, shaft end
downwards
IM V3 installation position vertical, shaft end
upwards
Note: On installation positions IM V3 in connection with protective class IP 64, the shaft
gland must be protected against ingress of water and dirt.
Safety class (EN 60034-5) with consideration of the shaft gland
IP 64 Standard: without shaft seal ring
IP 65 Option: with shaft seal ring
without the consideration of the shaft gland
IP 67 for self-cooling versions (IC 410 and
IC3W7); not for motors with terminal box
IP 65 for surface cooled versions (IC 416)
IP 65 for model with terminal box
Caution: The listed safety classes are only met when the plug connection is completely
installed (main and control connection) and fully closed terminal box.
Cooling process (EN 60034-6) IC 410 Standard:
completely enclosed motor design self-cooling
without fan
IC 416 Option: from shaft height 56
completely enclosed motor
surface cooled with fan
air flow direction from NDE to DE
IC 3W7 Option from shaft height 71
completely enclosed motor
water cooled
Cooling circuit connections towards NDE
(non-drive end)
Electrical connections (refer to annex1) via angled (3 x 90°) rotating built-in boxes
Caution:In the event of idling currents I
0
> 36 A the mains connection is via terminal boxes
Main connection 8-pole standard: U V W + temperature sensor
Option: brake
Control connection 12-pole standard: Resolver
12 / 17-pole Option: absolute encoder
Option: Encoder + thermal sensor
12-pole Option: Hiperface-port
17-pole Option: Endat 2.1
9-pole Option: Endat 2.2
fan (optional) 6-pole
Thermal motor protection (EN 60034-11) temperature sensor KTY84 in the stator winding
Winding insulation (EN 60034-1) Heat category F (Δθ = 105 K)
Ambient temperature 0 °C... +40 °C (standard)
Altitude of site (EN 60034-1) ≤ 1.000 m above sea level (standard)

Baumuller DSC Series Specifications

General

Brand	Baumuller
Model	DSC Series
Category	Engine
Language	English