TAM 00682 9
DSC 045-100 07 / 2012
Three-phase synchronous motor English
Rolling-contact bearings with long-term
grease lubrication: Standard: Ball bearing
Option (from shaft height 56): Roller bearing (DE-side)
Calculated bearing use duration 20.000 h (guide value)
Strength of vibration (EN 60034-14) standard: level A
on request: level B (only for ball bearings)
True running (DIN 42955) Standard: N
on request: R (reduced)
Shake proof (EN 60068-2-6) radial: 3 g (10 Hz to 100 Hz)
axial: 0.5 g (10 Hz to 100 Hz)
Holding brake Option
Rotation speed list value indicator Standard: 2-pole resolver
(high-quality version upon request)
Option: absolute encoder with Hiperface-port
Option: absolute encoder with EnDat-port
For further technical data, refer to our technical product list online at: www.baumueller.com
under
Download and Technical documentation. If necessary, you can request the corresponding
documentation.
Attention!
If the electric motor supplied is not a standard type as per the technical list or if special contractual
arrangements have been made, there may technical differences to the information contained in these
Commissioning and Maintenance Instructions. In this case, request the relevant technical
supplements.
2.5 Transport, intermediate storage
Water-cooled motors:
To avoid frost damage it must be ensured that there is no coolant in the motor during
the transport or intermediate storage at ambient temperatures < 3 °C.
Transport:
The permitted environmental conditions which affect the motor during the transport
must be taken from DIN EN 60721-3-2 (class 2K2/2M1). Contrary to the DIN, a
reduced temperature range of – 15 °C to + 60 °C is permitted.
Suitable load suspension material must be used, e. g. belt webbing, loop belts, etc. If
provided, the lifting lugs on the motor can be used for lifting.
The terminal boxes and motor connectors must not be used for securing the motor for
transport or as lifting eyes.
The regulations of the respective countries must be adhered to during transport. Lifting
devices and transport and lifting tackle must comply with the relevant regulations.
To Next Page
Loading...
Need help?
General
