TAM 00682 4
DSC 045-100 07 / 2012
Three-phase synchronous motor English
1 General safety instructions
1.1 Safety
This electric motor has been constructed in accordance with the relevant safety standards and
underwent an operational safety check before leaving our factory.
To ensure correct commissioning and safe utilization, please read the following:
• These Commissioning and Maintenance Instructions and if applicable the enclosed
supplementary parts
• The enclosed safety and commissioning notes
• The technical documentation that accompanies the product
• The commissioning and safety notes provided by the manufacturer of the converter
• The national, local, and system-specific regulations concerning your finished product
• The technical instruction of TAM 00697 during the use in safety relevant applications
We draw your attention to the following hazards when using the product:
Hazards resulting from • Lifting and transport
• Electrical power
• Moving parts
• Hot surfaces
• EMC interference
• Mechanical overload
• Thermal overload
To avoid damage to persons and property and to minimize residual risks, please read all of the
safety instructions and, in particular, those that are marked with a symbol.
Risk of fatality due to electric shock
Failure to observe can lead to fatal or serious injuries.
Warning about general dangers
Failure to observe can lead to serious injury or damage to property.
Warning about a dangerous situation
Failure to observe can lead to damage to the system or peripheral equipment.
Touching prohibited
Failure to observe can lead to serious injury.
Improper handling prohibited
Failure to observe can lead to serious injury
Warning about a hot surface
Failure to observe can lead to serious injury
Electrostatically sensitive components
Failure to observe can lead to damage to the system or peripheral equipment.
To Next Page
Loading...
Need help?
General
