TAM 00682 31
DSC 045-100 07 / 2012
Three-phase synchronous motor English
Warranty and liability
All the details in this documentation are non-binding customer information and subject to ongoing
change and will be constantly updated by our editing staff. Warranty and liability claims against
Baumüller Nürnberg GmbH are excluded if, in particular, damage is caused by one or more of the
following:
- You have not followed the instructions in this documentation.
- You have not used the system for the purpose intended.
- You have
• mounted, installed, commissioned, operated the system incorrectly or have
not carried out the required maintenance
• permitted the system to be mounted, installed, operated and/or maintained
by unqualified or insufficiently qualified personnel,
• overloaded the system,
• operated the unit with
- faulty safety devices,
- safety devices that were incorrectly fitted or not fitted
- safety devices or protective devices not in proper working order
• not operated the system in the stipulated ambient conditions.
- You have modified the system without the written approval of Baumüller Nürnberg GmbH.
- You have not observed the instructions concerning maintenance contained in the
component descriptions.
- You have not monitored parts that are subject to wear sufficiently.
- You have performed a repair incorrectly.
- You have combined the system with products from other manufacturers in an improper
manner.
- You have combined the drive system with faulty and/or incorrectly documented products
from another manufacturer.
The "General sales and delivery conditions" of the respective newest version from Baumüller
Nürnberg GmbH apply in principle.
These will be made available to you at the latest on conclusion of the contract.
To Previous Page
Loading...
Need help?
General
