Baumuller SI4000 - Safety

15
of 82
Operation Manual Safety I/O Terminals SI4000 / SO4000
Document no.: 5.08009.05
3SAFETY
This section provides an overview of all important safety aspects for the optimum protec-
tion of the personnel as well as for safe and trouble-free operation.
3.1 Contents of the Operation Manual
All persons assigned to work on or with the device must have read and understood that
Operation Manual before beginning work with the device. This also applies if the person
concerned has already worked with such a device or similar device or has been trained
by the manufacturer.
3.2 Alterations and rebuilding of the device
In order to avoid hazards and ensure optimum performance, neither alterations, additions
nor rebuilding work may be conducted on the device unless explicitly authorized by the
manufacturer.
3.3 Appropriate use
WARNING!
Caution - Risk of injury
Safety terminals may only be used for the purposes described below!
The safety terminals expand the application range of Baumüller bus terminals with func-
tions that enable them to be used for machine safety applications. The safety terminals
ar
e designed for machine safety functions and directly associated industrial automation
tasks. They are therefore only approved for applications with a defined fail-safe state.This
safe state is the wattless state. Fail-safety according to the relevant standards is required.