Baumuller SI4000 - Using of the Terminals with B Maxx Safe PLC

NOTICE!
Declaration of the version
All changes both of the hardware and of the firmware lead to a change of the version.
All cha
nges which impact security-relevant properties of the terminals are denoted in
this manual.
Functional Safety
Operation Manual Safety I/O Terminals SI4000 / SO4000
Document no.: 5.08009.05
27
of 82
4
4.3 Using of the terminals with b maXX safe PLC
The tests of the b maXX safe PLC are carried out with the following terminal versions.
Test Version input
termial SI4000
Version output
terminal SO4000
Module test FSoE 1701 1404
Module test Motion Control 1701 1404
Environmental test 1701 1404
EMC test 1701 1404
System test 1701 1405 / 1406
The results only apply for the current terminal hard
ware version at the time of testing. The
tests were carried out in a laboratory environment.