Declaration of EC conformity Doc.-No.: 5.10067.01
Date: 2015-03-04
according to machinery directive 2006/42/EC
We the manufacturer: Baumüller Nürnberg GmbH
Ostendstraße 80-90
90482 Nürnberg, GERMANY
declare that our product
Name: Safety I/O Terminals
Type: SI4000, SO4000
Date of manufacture: 2015-03-04
was developed, constructed and manufactured according to the machinery directive 2006/42/EC.
Applied harmonized standards:
Authorized person for preserving relevant technical documents:
Name: Engelbert Meier, Baumüller Nürnberg GmbH
Address: Ostendstraße 80-90, 90482 Nürnberg, Germany
Notified body which has provided the EC type-Examination Certificate in accordance with the machinery directive men-
tioned above:
Name: TÜV Süd Product Service GmbH
Address: Ridlerstr. 65, 80339 München / Germany
Notified body number: 0123
Registration number: Z10 15 03 75013 001 (SI4000) and Z10 15 03 75013 003 (S04000)
The safety instructions in the manual must be observed. This product is designed for integration in a machine. The com-
missioning is not allowed until the entire machine, in which this product is integrated, is complying with the directives men-
tioned above.
Nürnberg / 2015-03-04
Location / Date
subject to change of this declaration of EC conformity without notice. Actual valid edition on request
Standard Title
EN 61508-1:2010 Functional safety of security-related electric, electronic and programmable electronic systems - Part 1:
General requirements
EN 61508-2:2010 Functional safety of security-related electric, electronic and programmable electronic systems - Part 2:
Requirements for electrical/electronic/programmable electronic safety-related systems
EN 61508-3:2010 Functional safety of security-related electric, electronic and programmable electronic systems - Part 3:
Software requirements
EN ISO 13849-1:2008 Safety of machinery – Safety-related parts of control systems –
Part 1: General principles for design
DIN EN 81-1:2000 (to the extent
to which they may be applica-
ble)
Safety rules for the construction and installation of lifts - Part 1: Electric lifts
EN 13243:2004 (to the extent to
which they may be applicable)
Safety requirements for cableway installations designed to carry persons - Electrical equipment other
than for drive systems
DIN EN 61000-6-2:2006 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environ-
ments
DIN EN 61000-6-4:2007 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial
environments
To Next Page
Loading...