baxter 35700BAX User Manual

Preventive Maintenance 5
SIGMA Spectrum Infusion System Pump Operating Software Version 6.02 and 6.05
Preventive Maintenance For Use With MDL Version 6

Pump Case
 Pump Display
 Keypad
 Keyhole
 Pump Door
 IV Set Tube Channel
 Pole Clamp
 External Power Adaptor/Accessory Connection port
NOTE: The IV tube channel must be free of foreign materials and dry for both testing and
use.
2. Verify presence and legibility of all labels. Replace/order labels as necessary.
For label location, see Appendix A: “Technical Drawings” in the Service Manual.
 Company ID label
 Power/Bolus label
 Certification label
 Serial Number label
 Tubing ID label
 Direction of Flow label
 Replace/order labels as necessary.
3. Record the findings on the Preventive Maintenance Check Sheet.
Visual Inspection - AC Power Adaptor
To inspect the AC Power Adaptor:
1. Inspect the AC Power Adaptor for visual evidence of damage and/or defects such as cracks,
bent prongs, cuts or exposed wires or dents.
 AC Power Adaptor Module
 AC Power Adaptor Cord
 AC Power Cord Adaptor Retainer
If the AC Power Cord Adaptor Retainer is damaged,
 Remove the Retainer and inspect the 6-pin Plug Connector (on the AC Power Adaptor
cord).
 Inspect the External Power Adaptor/Accessory Connection port (on the back of the Pump)
for signs of damage such as cracks or missing pins.
NOTE: If damage is found on the AC Power Adaptor, it may be sent for service repair
(without the Pump).
2. If no signs of damage are found, plug the AC Power Adaptor into a working wall receptacle.

baxter 35700BAX Specifications

General

Brand	baxter
Model	35700BAX
Category	Water Pump
Language	English