ATTENTION: The guarantee will not be applicable, if directions for maintenance,
cleaning, and inspection in accordance with the instruction manual have not been followed.
The manufacturer and the supplier of the device deny liability, if:
• The device is not used in accordance with the instruction manual.
• The defect was not caused by the manufacturer or persons and service companies authorized
by the same.
7. RETURN OF DEVICES
Reasons for return:
1. Results of the first-time use tests are unsatisfactory/unsafe
2. Defective device
Please contact Baxter customer service to obtain a RETURN AUTHORIZATION (RA)
NUMBER prior to returning. Product returns will not be accepted without a Return Authorization
number.
When returning a device, clean it carefully and pack it in the original package. If the original
package is no longer available, the device has to be packaged in a manner corresponding
to the original package, i.e. individually and shockproof.
8. WASTE DISPOSAL OF PRODUCT
• Do not dispose product (device) as unsorted municipal waste.
• Collect product (device) separately.
• Use collection and return systems available to you.
9. TECHNICAL DATA
• Outer dimensions L 155 mm x W 240 mm x H 160 mm
• Gas supply line L 5 m x 6 mm
• Weight 1.8 kg
• Pressurized gas supply 3.5 – 7 bar
• Maximum pressure 3.0 +/- 0.2 bar
• Admissible pressurized gases Compressed air or nitrogen
• Operating conditions Temperature: 10º-40ºC, 30-75% relative
air humidity, avoid shocks and vibrations.
10. MANUFACTURER AND DISTRIBUTOR
Distributed in the USA by:
Baxter Healthcare Corporation
Westlake Village, CA 91362
1-800-423-2090
US: Rx Only
9
G4505_EasySpray_IFU_US_3OK 24.05.2005 15:06 Uhr Seite 9
To Next Page
Loading...
Need help?
General
