Use of the BenthoTorch
bbe BenthoTorch Manual Page 16
The current function of each key is shown on the display.
During the start-up of the instrument the keys are calibrated. So please do not touch the keys during the switch-
on procedure.
During submersion the keys are deactivated. This is recognised by detecting more than one key pressed at the
same time. The keys are reactivated when the keys are dry again.
Storing the BenthoTorch
The best way to store the BenthoTorch is in the original case. The cable and the accessories can also be stored
in this case.
To Next Page
Loading...