BBE BenthoTorch - Clock and Display Settings; Clock Settings (Date, Time, Sync)

Operating the bbe BenthoTorch
bbe BenthoTorch Manual Page 25
A UTO P OWER D OWN
Sets the time after which the BenthoTorch is automatically turned off, when not operated. It is also possible to
disable this function. In this case the BenthoTorch will not be switched off. There are several predefined period
available by using the + and – keys.
AutoPowerDown
after 5 minutes
OK + - ESC
One additional option is to disable the power down:
AutoPowerDown
disabled
OK + - ESC
The option shall be disabled in during continuous operation.
C LOCK -> DATE
Sets the date
SETTINGS:DATE
15.02.09
OK + - ESC
C LOCK -> TIME
Sets the time
SETTINGS:TIME
15:32:43
OK + - ESC
C LOCK -> S YNC . GPS TIME
Sets time / date according to the time / date received from the GPS satellite. This function requires a GPS
receiver within the BenthoTorch and the signal quality needs to be sufficient.
SETTINGS-Clock
< Sync. GPS time >
OK <- -> ESC
Click OK to synchronise the time settings of the BethoTorch with the satellite settings.