Operating the bbe BenthoTorch
bbe BenthoTorch Manual Page 24
Settings Menu
O
VERVIEW
Mode Single, continuous or interval measurements
Measuring duration Set the duration of a single measurement (default = 10s)
Measuring interval Set the interval between two measurements in interval mode
Clock -> time Set time
Clock -> date Set date
Clock -> Sync GPS time Sets time / date received from the GPS satellite.
Clock -> UTC time shift Set the time zone
Clock -> Dayli. saving Toogle between summer and winter setting
Display -> Contrast Set the contrast of the display
Display -> Brightness Set the brightness of the display
Software Version Displays the software version
M
ODE
Changes between single, continuous and interval measurement.
SETTINGS:MODE
< Single >
OK <- -> ESC
SETTINGS:MODE
< Continuous >
OK <- -> ESC
SETTINGS:MODE
< Interval >
OK <- -> ESC
• Single: One single measurement is performed after starting.
• Continuous: The BenthoTorch performs one measurement directly after the other.
• Interval: Performs one measurement after the other with the given measuring interval.
M
EASURING DURATION
Sets the duration of a single measurement (default = 10s)
Measuring dur.:
10 s
OK + - ESC
M
EASURING INTERVAL
Sets the interval between two measurements in interval mode
To Next Page
Loading...