bbe++ Software
bbe BenthoTorch Manual Page 35
bbe++ Software
The bbe++ software is delivered together with bbe instruments. It provides the following functions:
• operation, control and calibration of bbe instruments
• data analysis and display in tables and diagrams
• export in different formats
This chapter describes the general functions of the bbe++ software. The examples may show data or
parameters of other bbe instruments. The data and parameters of your instrument can easily be handled
accordingly. Whenever this manual deals with special features of a certain instrument, this will be explained in
the special instrument chapter.
The data and parameters of the instruments are stored in a database. A single database may contain the data of
different instruments of the same type and also different types of instruments.
Software Set-Up
The software is stored on a CD delivered with the instrument. The latest version can also be downloaded from
the bbe website after registration (http://www.bbe-moldaenke.de/log-in/ ).
The Windows autorun function should start the installation automatically. If it does not, open the Explorer and
click on setup.exe on the CD for installation.
Welcome window: click “N
EXT
>”
To Next Page
Loading...