BBE BenthoTorch - Software Navigation and Settings; Navigation within Software; Entering Settings

Use of the BenthoTorch
bbe BenthoTorch Manual Page 18
N AVIGATION WITHIN THE S OFTWARE
The software is structured in menus with different layers. For an overview, please see above.
< SETTINGS >
OK <- -> ESC
SETTINGS:
< Mode >
OK <- -> ESC
SETTINGS:MODE
< Single >
OK <- -> ESC
Functions of the keys:
OK: To choose the item shown and enterthe submenu
ESC: To discarde the changes and leave the menu
<- ->: To navigate within the same menu level.
E NTERING S ETTINGS
To change the settings of the BenthoTorch, choose the parameter in the SETTINGS menu:
Measuring time:
10s
OK + - ESC
The underlined number is currently changeable by using the + and – keys.
OK: Confirms the underlined number and moves the cursor one position to the right. If the last number is
underlined, OK confirms the new setting and returns to the SETTINGS menu.
+ / -: Changes the currently underlined number
ESC: Cancels the input and returns to the SETTINGS menu.