- 14 -
Remote c ontrol does not
operate
1.Remote control is incorrectly directed
at the DVD players's screen.
2. Distance to the DVD players is in
excess of 8 meters.
3.Run out batteries.
1.Use t he remote control according
to the manual.
2.Decrease the distance to the DVD
players .
3.Replace both batteries.
Some functions do nor
work
1.Disc is recorded incorrectly.
2.Incorrect key sequence.
3.Static voltage on the DVD player's
housing.
1.Wait5-10 seconds and the DVD
players will automatically return t o
normal state.
2.Repeat t he operation one more
time.
3.Switch the DVD players off for 1-2
minutes and then switch it on again.
Unstabl e image 1.Incorrect TV set settings. 1.Correct the TV set settings.
2.5.3 Specification
Supported formats
Data medium
Inputs
Analog outputs： 2.0CH output.
Digital outputs： Coaxial audio out
Video outputs: S-Video output,
RGB/SCART output, Composite output
Audio characteristics
Voltage range
Temperature requirement
Moisture requirement 15-75%(not c ondensate)
Outputs
C:0.286V p-p(75 )
Signal s wing of component video output: 1.0Vp-p(75 )
Signal s wing of composite video output: 1.0Vp-p(75 )
Signal s wing of S-Video out put: 1.0Vp-p(75 )
DVD-Video, Super VCD, VCD, MPE G-4, CD-DA, CD+G, HDCD, MP3, WMA,
Kodak P icture CD, JPEG
CD-R, CD-RW , DVD-R, DVD+R, DVD-RW, DVD+RW
Microphone input(two microphone inputs for(DV611SI,DV624SI,DV626SI ,DV628SI
models.one microphone inputs for DV214&216SI&DV118SI)
Audio outputs
5-35
Cb/Cr:0. 7Vp-p(75 )
Video characteristics
Frequency: 20-20000 Hz( 1 db)
Signal-t o-noise ration: > 100 db
~110-250V, 50/60 Hz
#We improve quality of our production permanently, that’s why specification can change without
notification.
#Some discs, recorded in any supported format on any compatible device, can’t playback or can
playback incorrect over peculiarity of their record.
Model Dimensions(mm) Weight(kg) Power consumption(watt)
1.3
14
DV118SI
260×175×38
1.3
DV216SI
260×175×38
To Next Page
Loading...
