- 13 -
Miscell aneous
Poss ibili ty of programmable cont rol of the
decoder to t ransfer bass es int o low-
frequency c hannel in sys tems equipped
with broad-band speakers and a
subwoofer.
Compatibl e with exist iing and future t wo-
channel(s tereo) formats .
Undoubted progress in sound rec ording
technology, espec ially important for
program direct ors, fil m directors, sound
engineers and ac tors.
Big progress in c omparison with
conventional s tereo, t he world's mos t
popular surround format.
2.5 MISCELLANEOUS
2.5.1 Useful notes
#To extend the service life of your DVD player make pauses of not less than 30 seconds between
switching off and repeatedly switching on the DVD player.
#Disconnect the DVD player from the wall outlet after shutdown.
#Some DVD player’s functions may not be applied to some discs.
#Use supply sources of rated voltage, otherwise the DVD player may not function or be damaged.
#In case of the DVD player’s occasional stops, please switch the power supply off and then on again.
2.5.2 Trouble shooting
Please check probable causes of malfunction before addressing the service center.
Sign of trouble Cause of trouble Act ions t o elimi nate the t rouble
No sound 1.Poor audio cable c onnection
2.Disc dirty or damaged.
3. Sound disabled by the MUTE button.
1.Mak e proper connect ion
2. Clean the disc
3. Pres s the MUTE butt on.
No image 1.Poor video cable c onnect ion.
2. Incorrect settings of your TV set.
3.The DVD player is in t he progressi ve
scan mode while your TV set does not
support t his m ode.
1. Mak e proper connect ion.
2. Correct the setti ng of your TV set.
3. Place the DVD players in t he
interlac ed sc an mode through the
DVD-receiver's menu.
Blac k and white image 1. Incorrect TV color system selected.
2. Color level on theTV set adjust ed
incorrec tly .
1. Set the appropriate color s ys tem
via the menu: SE TUP>Image>TV
scan.
2.Readjust the c olor sy stem of your
TV s et
Disc s cannot be read 1. Disc not insert ed.
2.Disc ins erted incorrectly.
3.Condensat e on the DVD play er's las er
head.
1.Insert the disc.
2.Inst all the disc with the label side
facing up.
3.Switc h the DVD play ers on without
disc for an hour.
Microphone does not
operate
1.Microphone is unplugged.
2.Low level of the mic rophone's sound
volume.
1.Connect the microphone.
2.Adjust the level of the mic rophone's
sound volume.
To Next Page
Loading...
