10
REV 0.9.5
TIMER
Scroll the TIMER in the MAIN SCREEN using the UP/DOWN keys (arrow will dis-
play) to modify its value. Press the M/E key:
Use the LEFT and RIGHT keys to select the digit to be changed. Adjust the
values using the UP and DOWN Keys, press the M/E key to enter and store the
value and return to the main screen. .
Once you enter a value, the control will begin counting down. The maximum
value is 99:59:59. When the countdown finished, the action specified in TIME-
OUT will be taken.
SYSTEM SETUP SCREEN
To access the SYSTEM SETUP from the MAIN SCREEN display, press and hold the
UP and DOWN keys together for 3 seconds.
Just as with the main screen, pressing the UP or
DOWN Keys will scroll up and down through the
list of shown parameters as follows:
When SYSTEM SETUP is in the top line (with
arrow) pressing the LEFT or RIGHT key will index
to the Control or Wi-Fi setup screens.
Scroll through the values using the UP/DOWN
keys. To modify a value, press the M/E key. Use the LEFT/RIGHT keys to select
the digit to be modified, then adjust the value with the UP/DOWN keys. Press
the M/E key to save. To return to the MAIN SREEN press
the UP and DOWN keys together.
SCROLLING
You may select whether or not the MAIN SCREEN automatically scrolls. The
default value is OFF. Set using the UP/DOWN keys as described above.
BACKLIGHT
The display backlight is adjustable from 0-100%. Select the digit using the LEFT
and RIGHT keys and adjust the value using the UP/DOWN keys.
CONTRAST
The display contrast is adjustable from 0-100%. Select the digit using the LEFT
and RIGHT keys and adjust the value using the UP/DOWN keys. Note that vary-
ing just a small amount will make the display unreadable; we suggest leaving it
at the default value of 10%.
TIMER
12:01:00
SYSTEM SETUP
SCROLLING: ON
BACKLIGHT: 50%
CONTRAST: 10%
UNITS: DEG F
ALARM BEEPS: 3
KEY BEEPS: ON
>
To Next Page
Loading...
