11
REV 0.9.5
UNITS
You may select whether to use Deg F or Deg C. Default is Deg F. Select the digit
using the LEFT and RIGHT keys and adjust the value using the UP/DOWN keys.
ALARM BEEPS
You may select from OFF, 1, 2, 3, 4 and 5. Select the digit using the LEFT and
RIGHT keys and adjust the value using the UP/DOWN keys.
KEY BEEPS
Whenever a key is pressed, a short chirp occurs as feedback for a key press. The
default value is ON. Select the digit using the LEFT and RIGHT keys and adjust
the value using the UP/DOWN keys.
CONTROL SYSTEM SETUP
To access the CONTROL SETUP from the MAIN SCREEN display, press and hold
the UP and DOWN keys together for 3 seconds, then press the LEFT KEY. To
return to the MAIN SREEN press the UP and DOWN keys together.
Once in CONTROL SETUP, pressing the UP or DOWN keys singly will index up
and down through the list of shown parameters as follows:
Scroll through values in the CONTROL SETUP
SCREEN using the UP/DOWN keys. To modify a
value, press the M/E key. Use the LEFT/RIGHT keys
select the digit to be modified. Adjust the value
with the UP/DOWN Keys. Press the M/E key to
save. To return to the MAIN SREEN, press the UP
and DOWN keys together.
When CONTROL SETUP is in the top line (with
arrow), pressing the LEFT or RIGHT key will index to the other setup screens.
COOK HOLD
COOK HOLD defines the temperature that the cook setpoint will be reset to
when the TIMER expires, if TIMEOUT action is set to HOLD. The default is 200° F.
Set using the UP/DOWN keys.
TIMEOUT
TIMEOUT defines the action that will be taken when the timer counts to
00:00:00. The selections are NO ACTN, HOLD, ALARM, SHDN. The default is NO
ACTION. Set using the UP/DOWN keys.
CONTROL SETUP
COOKHOLD: 200°F
TIMEOUT: NO ACTN
ALARM DEV: 50
RAMP: OFF
OPEN DETECT: ON
CYC TIME: 6
PROP BAND: 30
>
To Next Page
Loading...
