BCM RX45Q - Page 60

RX45Q User’s Manual
60
2.2.6.15 USB KB Wake-Up from S4
When “Enabled”, enter any key to wake up the system from S4 state. The choices are “Enabled” and
“Disabled”.
2.2.6.16 Resume by Alarm
When “Enabled”, set the date and time at which the RTC (real-time clock) alarm awakens the system from
suspend mode. The choices are “Enabled” and “Disabled”.
2.2.6.17 Primary / Secondary IDE
The options: Disabled, Enabled.
2.2.6.18 FDD, COM, LPT Port
The options: Disabled, Enabled.
2.2.6.19 PCI PIRQ [A-D] #
The options: Disabled, Enabled.
2.2.6.20 Power Type
The options: AT, ATX.
2.2.6.21 HPET Support
The options: Disabled, Enabled.
2.2.6.22 HPET Mode
The default is 32-bit mode.