BEA Eagle 10 User Manual

75.5185.04 20070727 Page 1 of 8
EAGLE
USER GUIDE
NOTE: For mounting heights between 10’ and 16’, use BEA model 10EAGLEHM (high mount).
DESCRIPTION SPECIFICATION
Frequency: 24.125 GHz
Supply voltage:
12 to 24 V AC: ± 10%:
12 to 24 V DC: -10% / +30%:
Mounting height: Normal: 7’; Maximum: 10’-0”
Tilt angle:
0° to 90° vertical
-15° to +15° lateral
Detection area:
Wide
Narrow
13ft (W) x 6.5ft (D)
6.5ft (W) x 8.2ft (D) (supplied as optional)
Minimum detection speed: 2 in/sec. (measured in axis)
Power consumption: < 2 W
Standard output relay:
Max contact voltage
Max contact current
Max switching power
60 VDC / 125 VAC
1 A (resistive)
30W (DC) / 60VA (AC)
Hold time: 0.5 sec. to 9 sec. (adjustable)
Temperature range: -4°F to 131°F
Dimensions: 4.75in (W) x 3.15in (H) x 2.0in (D)
Weight: 0.5lbs
Material: ABS
Housing color: Black. Can be painted with non-metallic paint
Cable length: 6ft
1 Description
2 Technical Specifications
Terminal
Block
Narrow Antenna Storage Manual Set-Up Buttons
Wire Passage Hole Planar Antenna
Lateral and Angle
Adj. For Antenna
Opening Tab
Wire Opening Knockout
(inside the cover)
Front Cover
LED

BEA Eagle 10 Specifications

General

Brand	BEA
Model	Eagle 10
Category	Accessories
Language	English

Summary

Technical Specifications

Installation Guide

Installation Tips

Tips for optimal sensor placement and mounting to prevent vibration and interference.

Safety Precautions

Essential safety measures, including power shutdown, environmental awareness, and ESD protection.

Mechanical Installation Steps

Electrical Installation

Mechanical Adjustments for Sensing Field

Sensing Field Width (Antenna Type)

Determining sensing field width based on the choice of planar antenna (3-element vs 6-element).

Sensing Field Position (Vertical Tilt)

Adjusting sensing field position using the vertical tilt angle of the antenna.

Sensing Field Position (Lateral Tilt)

Sensing Field Dimensions (Sensitivity)

Sensing Field Dimensions (Mounting Height)

Programming Guide

Understanding Detection Modes

Using Number and Adjustment Keys

Manual Setup Procedure

Adjustable Sensor Parameters

Manual Sensitivity Adjustment

How to manually adjust sensitivity and restore default values using the sensor's buttons.

Troubleshooting Common Issues