BEA EAGLE ONE HM - User Manual

1/8
EAGLE ONE HM & EAGLE TWO HM
EAGLE ONE HM & EAGLE TWO HMEAGLE ONE HM & EAGLE TWO HM
EAGLE ONE HM & EAGLE TWO HM
USER’S GUIDE
UNIVERSAL MOTION SENSORS FOR HIGH MOUNTING ON AUTOMATIC DOORS
EAGLE ONE HM : unidirectional sensor •
••
• EAGLE TWO HM: bidirectional sensor
Technology :
microwave and
microprocessor
Transmitter frequency :
24.175 GHz
Transmitter radiated power :
< 20 dBm EIRP
Transmitter power density :
< 5 mW/cm²
Mounting height
• Minimum :
4m
• Maximum :
5m
Tilt angles :
0° to 90° vertical
-30° to + 30° lateral
Detection area
(mounting height = 5 m)
:
4m (W) x 2.5m (D)
Detection mode :
motion
Minimum speed :
5 cm/s (measured in the
sensor axis)
Supply voltage :
12V to 24V AC ±10%
12V to 24V DC +30% / -10%
Mains frequency :
50 to 60 Hz
Power consumption :
< 2W (VA)
Output relay (free of potential change-over contact)
• Max. contact voltage :
42V AC - 60V DC
• Max. contact current :
1A (resistive)
• Max. switching power :
30W (DC) / 60VA (AC)
Hold time :
0.5s to 9s (adjustable)
Temperature range :
-20°C to +55°C
Degree of protection :
IP54
Norms and conformity :
EMC 2004/108/EC
Dimensions :
120 mm (W) x 80 mm (H) x 50 mm (D)
Weight :
0.215 kg
Material :
ABS
Color of housing :
anthracite gray, aluminum finish
or white
Length of cable :
2.5m
Manual adjustment
• Sensitivity (by push buttons)
• Orientation of sensing field (mechanically)
Remote control adjustments
• Sensitivity
• Hold time
• Detection mode
• Immunity
• Mounting height
• Output configuration
• Door control
• Security
:
:
:
:
:
:
:
:
10 levels
from 0.5s to 9s in 10 levels
uni-/bidirectional, MTF, reverse mode
(Eagle ONE HM only)
quasi-presence, normal, increased
immunity, additional increased
immunities
standard, high
active/passive
automatic, permanently open/closed
1-4 digit access code
Terminal block
Wire opening footprints
Infrared receiver
LED
Push buttons
Lateral antenna position
adjustment
Planar antenna
Vertical antenna position
adjustment
The sensor must be firmly
fastened to prevent from
vibrating.
The sensor must not be
placed directly behind a
panel or any kind of
material.
The sensor must not
have any object likely to
move or vibrate in its
sensing field.
The sensor must not
have any fluorescent
lighting in its sensing
field.
To avoid damage by
electrostatic discharges,
do not touch any
electronic part of the
sensor.
DESCRIPTION OF
THE SENSOR
INSTALLATION
TIPS
INTERNAL VIEW
HOUSING
(INTERNAL VIEW)
TECHNICAL
SPECIFICATION

Summary

Technical Specifications

Mounting and Detection Parameters

Sensor Description and Installation Guidance

Critical Installation Tips

Provides essential advice on secure mounting, avoiding obstructions, interference, and ESD protection.

Mounting Procedures and Options

Wiring and Securing the Sensor

Details connecting wires to the terminal block and properly tightening the sensor for stable mounting.

Sensing Field Configuration

Sensitivity Impact on Detection Field

Explains how sensitivity settings (0-9) determine the width, depth, and dead zone of the sensing area.

Lateral Antenna Angle Adjustments

Illustrates how adjusting the lateral angle of the planar antenna shapes the sensing field's position.

Vertical Antenna Angle Adjustments

Remote Control Operation and Configuration

Sensor Configuration Workflow

Outlines the process of unlocking, adjusting parameters using various keys, and locking settings.

Key Functions and Parameter Mapping

Detailed Parameter Settings

Checking Parameter Values via LED

Sensitivity and Hold Time Adjustment

Guides on setting sensitivity and hold time using numeric or +/- keys, with functional definitions.

Detection Mode and Immunity Selection

Details choosing detection modes (uni/bi-directional, MTF) and immunity levels for different environments.

Mounting Height and Output Configuration

Door Control Mode Configuration

Advanced Features and Troubleshooting

Restoring Factory Default Settings

Sensitivity Control via Sensor Buttons

Understanding LED Status Indicators

Troubleshooting Common Sensor Issues

Provides solutions for frequent problems such as doors not opening, erratic behavior, and false detections.

BEA EAGLE ONE HM Specifications

General

Material	ABS Plastic
Sensitivity Adjustment	Yes
Audio Alert	No
Power Supply	12-24 VDC
Operating Temperature	-20°C to +55°C
Visual Alert	LED Indicator