BEA 1SAFE User Manual

1/4
1SAFE
1/4
Do not cover the
sensor.
Avoid high intensity
lightning in the
detection field.
Avoid reflective
background or objects
in the detection field
of the sensor.
Do not touch the
optical parts.
FLICKERS
FLASHES
SLOWLY
ON
OFF
RED LED is ON during detection
ORANGE LED flashes 1X after power on
Emitter
Receiver
Cable
with
connector
Fixation
screw
Setup
adjustment screw
LED
DIP-switch
Push button
Front face
INSTALLATION TIPS
LED-SIGNAL
DESCRIPTION
USER’S GUIDE
ACTIVE INFRARED SAFETY SENSOR FOR AUTOMATIC DOORS

BEA 1SAFE Specifications

General

Category	Accessories
Type	Safety Sensor
Model	1SAFE
Material	Plastic
Color	Black

Summary

Description

LED Signal

Details the LED status indicators for detection and power-on states.

Installation Tips

Provides essential tips for optimal sensor placement and avoiding interference.

Installation

Additional Adjustments

Automatic Mode Setup

Explains automatic setup via push button and manual mode selection using DIP switches.

Uncovered Zone Adjustment

Adjusts the detection range for safety (small/big) using DIP switch 2.

Frequency Settings

Configures frequency to avoid crosstalk with other sensors using DIP switch 3.

Monitoring Input Configuration

Sets monitoring input mode to high or low using DIP switch 4.

Troubleshooting

Technical Specifications