25.
Keep t h e unit dry and protect from
condensation.
26.
If in doubt whether liquids have penetrated
inside the unit, it is advisable not to use the
instrument
and to send it to the manufacturer for testing.
27.
Prevent the formation of condensation due to
thermal sudden change.
28.
In presence of condensation, avoid switching on
the unit because it could be damaged.
29.
In case of an evident or suspected defective
operation of the unit, the user is suggested to
send the unit to a BEACMED authorised
technical after sale Servicing Centre, for a
functional control.
30.
No repair or modification of this device or its
accessories is allowed unless previously
authorised in writing by the Manufacturer.
31.
Avoid using the unit on more than one patient
per session.
32. Use only original accessories, if supplied. If the
device is used with commercially available
probes, they must be CE marked, as a class IIa
medical device, according to Directive 93/42/
EEC-MDD. Before using these special
accessories, it is mandatory to carefully read the
instructions for use and cleaning, which must be
included in their packaging.
To Next Page
Loading...