BEACMED evoStim E - Table of Contents; E - User Guide

evoStim
®
E - User guide 3
CONTENTS
1 Description and Intended use 5 ___________
2 Indications of perineal electrostimulation 6
2.1 - Stress incontinence, 6 _________________________
2.2 - Urge incontinence 6 ___________________________
2.3 - Mixed incontinence 6 __________________________
3 Indications of perineal biofeedback (BFB) 7
3.1 - Recruiting Biofeedback 7 _______________________
3.2 - Training Biofeedback 7 ________________________
4 CONTRA- INDICATIONS 9 ________________
Specific contraindications of perineal electrostimulation. 9 _
5 WARNINGS AND PRECAUTIONS 10 ________
6 CHECKING THE PACKAGE 13 _____________
PERSONAL USE OF THE PROBES! 13
7 HOW TO ASSEMBLE THE UNIT 14 __________
7.1 - BATTERIES 14 ______________________________
7.2 – LEAD WIRES 14 _____________________________
7.3 - PROBE 15 __________________________________
7.4 - PLACEMENT OF THE PROBE 15 _______________
STEP 5 - USING THE UNIT 15 ______________________
8 OPERATION 16 __________________________
8.1 - FREQUENT OPERATIONS 18 __________________
8.1.1 Switch-ON the unit 18 _________________________
8.1.2 Switch-OFF the unit 18 ________________________
8.1.3 Select a program 18 __________________________
8.1.4 Select the type of probe in use 18 ________________
8.1.5 Set the stimulation level 18 _____________________
8.1.6 Start the session 19 ___________________________
8.1.7 Adjust the stimulation level during the session 19 ____
8.1.8 - Conclusion of the session 19 __________________
8.2 - OPTIONAL OPERATIONS 19 ___________________
8.2.1 Temporarily stopping the session (PAUSE) 19 ______
8.2.2 Changing the session time (min’)* 20 _____________
8.2.3 - Modify the frequency (Hz) 20 __________________
8.2.4 - Display the pulse-width (µs)* 20 ________________
8.2.5 - Modify the ACTION! time (sec)* 20 ______________
8.2.6 - Modify the RELAX time (sec) * 20 _______________
8.2.7 Manual adjustment of the biofeedback scale * 20 ____
8.2.8 Automatic adjustment of the biofeedback scale * 20 __
8.2.9 - Restoring factory settings * 21 _________________
8.3 - ACCESSORY OPERATIONS 21 _________________