7
HOW TO ASSEMBLE!
THE UNIT
7.1 - BATTERIES
To remo ve the battery-
compartment cover, insert the
special plastic key provided in the
slot on the side of the cover and
pushing in the direction of arrow
ⓐ (DO NOT turn the key!); Lift
off the battery cover; Insert the
three batteries supplied ⓑ,
observing the polarity shown on
the bottom of the battery
compartment ⓒ. Close the
battery-
compartment
with the cover
ⓓ.
Note: The unit may not work if one or more batteries
are inserted in reverse.
CAUTION!: There is a risk of explosion if the
batteries are fitted incorrectly. Replace only with AAA
Alkaline 1.5 volt batteries (LR03). Do not use other
batteries. Do not mix old and new batteries. Do not
dispose of the batteries in a fire and keep them out
of reach of children. The batteries must be removed
from the device before it is scrapped and disposed
of safely. When the unit is not used for a long time,
you must remove the batteries to avoid deterioration
and leaking battery acid. This could irreparably
damage the unit’s electronics.
7.2 – LEAD WIRES
Unravel the gray cable and insert the plug into the
outlet , located at the
base of the unit.
To Next Page
Loading...