8.3.1 Change the backlight intensity. 21 ________________
8.3.2 Enable/Disable the audible feedback (the “buzzer”).
21
8.3.3 Replacing the batteries. 22 _____________________
9 PROGRAMMES with ELECTRO-
STIMULATION 23 __________________________
9.1 - Open-circuit safety cutout 23 ____________________
9.2 - The session time 24 __________________________
9.3 - Programme URGE 24 _________________________
9.4 - Programme STRESS 24 _______________________
9.5 - Programme MIXED 24 ________________________
9.6 - Programme PAIN 24 __________________________
9.7 - Programme EVOCATED 25 ____________________
10 The BIOFEEDBACK PROGRAMME 27 _____
10.1 - Valid contraction 28 __________________________
10.2 - Pre-set parameters of the biofeedback programme
(BFB) 28 _______________________________________
10.3 - Reset of the biofeedback sensor 28 _____________
10.4 - How to perform a BFB session 29 _______________
11 Technical features 31 ____________________
The backlight 32 _________________________________
12 Trouble- shooting table 33 _______________
13 Labelling and symbols 37 _______________
14 Cleaning and maintenance 41 ____________
Clean the unit 41 _________________________________
Maintenance of the unit 41 _________________________
Cleaning of electrodes and probes 41 _________________
15 Information for disposal of the product 43_
To Next Page
Loading...