Need help?Do you have a question about the BeaconMedaes MEGA 2 and is the answer not in the manual?
General| Brand | BeaconMedaes |
|---|---|
| Model | MEGA 2 |
| Category | Security System |
| Language | English |
Describes various modules like Annunciator, Digital Display, Multi-Signal, and Blank modules.
Explains key terms used in the manual, such as Area Alarm Panel, Dry-Contact, and General Fault Relay.
Discusses available panel sizes and how alarm configurations are specified.
Provides step-by-step instructions for safely removing the alarm panel from its packaging.
Instructions for preparing and securing the alarm panel's back box within the wall.
Steps for installing the specific mounting boxes required for remote sensors.
Details on connecting sensor modules directly to gas or vacuum pipelines.
Specifics regarding the physical connection of sensor modules into the system.
Information on utilizing DISS connection kits for integrating pressure switches.
Essential electrical standards and safety practices that must be followed for wiring.
Specifications detailing the acceptable wire types and dimensions for the system.
Guidelines for directing and managing wires within the alarm panel back box.
Rules for calculating the necessary number of conductors based on system configurations.
A list of available wiring diagrams that illustrate system connections.
Illustrative wiring scenarios for common master and area alarm setups.
Procedures for making the main AC power connections to the alarm panel.
Steps required to attach and secure the main front panel assembly to the back box.
Instructions for installing sensor modules, covering both remote and local types.
Details on connecting the wires from remote sensors to the appropriate display modules.
Guidance on connecting dry-contact signals originating from source equipment.
Procedures for correctly grounding field wiring cable shields within the back box.
Methods for connecting the alarm panel to a Building Automation System (BAS).
Instructions for wiring slave alarm panels to duplicate pressure readings from a master panel.
Initial power-on sequence and essential visual and audible checks.
A guided process for configuring alarm parameters and system settings.
Initial settings and basic configuration steps for digital display modules.
Accessing and adjusting advanced communication and display settings for modules.
Steps to set network address, baud rate, and data format for communication.
Configuring gas service identification, display offset, and alarm repeat times.
Configuring signal options, including enabling/disabling individual signal locations.
Advanced settings for communication parameters and display intensity on multi-signal modules.
Describes how the system operates and indicates status during normal monitoring.
Procedures for performing periodic system self-tests on modules.
A comprehensive guide to diagnosing and resolving common operational issues.
Identifies and lists the part numbers for components of the front panel assembly.
Lists the part numbers for various components located within the alarm panel's back box.
Details the different types of sensors and their corresponding part numbers for replacement.
Lists kits required for replacing modules or performing field installations.
Explains the warranty coverage, limitations, and the procedure for making a claim.
To Next Page
