VOIP Menu Cont’d
12
Features & Set-Up
Records - Tap to open the records menu.
• Represents call-dialed
• Represents call-received
• Represents call-missed
• Tap or to scroll through records (Max. 64
records).
• Select one record, press to call; Press to
delete; to back-up. If record has image
attached, press to view it.
Room - Tap room to enter room settings menu
(Default Pass: 123456)
*Note*: Please revise the 6-Digit Sync # ASAP to
prevent conict. The sync # is used to synchronize
multiple devices in one household.
• Building No. - Max 3-Digits (Ex. 001)
• Unit No. - Max 2-Digits (Ex. 01)
• Floor No. - Max 2-Digits (Ex. 03)
• Room No. - Max 2-Digits (Ex. 10)
For this example, when calling from an outdoor panel,
you would dial 0310# (Floor + Unit + #).
• Device No. - Set to 0 for master device, 1-5 will
be set as “slaves” (sub1-sub5).
Additonal devices will need the same SYNC # and
set to device 1 to 5 (including within the IpCalls
smartphone app).
• Server & Password - IP Address of the
Management PC running the available software.
(Default Password: 123456 - set on PC)
Monitor Menu
Records Menu
Room Settings
To Next Page
Loading...
Need help?
General