EasyManuals Logo

BEC Integrated Solutions NT-IP-A9K User Manual

BEC Integrated Solutions NT-IP-A9K
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
A9K Door Setup Cont’d
22
Features & Set-Up
Online Settings - Accessed through assigned IP
address on a network based computer.
1. Network Settings
DHCP: Enable/Disable
IP Address: Default = 192.168.68.90
Default Mask: 255.255.255.0
Gateway: Default = 192.168.68.1
DNS Address: 8.8.8.8
Server IP: Address of the management PC
Password: For PC access (default = 123456)
2. Device Settings
Build and Unit Number need to be the same of
the Outdoor Panel.
Unique for the Outdoor Panel. Max of 9 outdoor
panels.
Sys Password: Default = 123456; this changes
the login password for online access, and panel
admin settings outside.
Panel Mode:
Unit panel - Used in one unit; calls residents and
guard station. (This is the most common mode).
Panel Mode Cont’d
Wall panel - Used at a community entrance; calls
outdoor panels, residents, and management center.
Personal Panel - N/A
Panel volume and language can be adjusted as well.
Forward: Change between “All at Once” or “One by
One” to change the call fowarding behavior.
1. Network Settings
2. Device Settings
3. SIP Settings

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BEC Integrated Solutions NT-IP-A9K and is the answer not in the manual?

BEC Integrated Solutions NT-IP-A9K Specifications

General IconGeneral
BrandBEC Integrated Solutions
ModelNT-IP-A9K
CategoryIntercom System
LanguageEnglish