EasyManua.ls Logo

Becker AR 4201 - Technical Data - Receiver; Receiver Specifications

Becker AR 4201
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B. Receiver data
Type of receiver Single superhetrodyne receiver
Sensitivity ≤ 5 µV EMF for 6 dB = SINAD
(mod. 1000 Hz/30%)
IF bandwidth ≥ ± 8 kHz at 6 dB attenuation
Selectivity ≥ 40 dB at ± 17 kHz
≥ 60 dB at ± 25 kHz
Squelch Can be adjusted and switched off
AGC characteristic for
5 µV to 100 mV EMF ≤ 6 dB
Distortion m = 85% ≤ 15%
Audio frequency response ≤ 6 dB 350 Hz to 2500 Hz
relative to 1000 Hz ≥ 18 dB at 4000 Hz
Intermediate frequency 21.4 MHz
Rated output
for speaker operation at 13.75 V nominal operating
voltage ≥ 3 W at 4 Ω
at 10.0 V operating voltage
(emergency mode) ≥ 1.5 W at 4 Ω
with headset connected at 13.75 V nominal operating
voltage ≥ 100 mW at 600 Ω
at 10.0 V operating voltage
(emergency mode) ≥ 30 mW at 600 Ω
Audio auxiliary input 1 V to 8 V at 600 Ω ± 10%
adjustable
(regardless of volume)
C. Transmitter data
Transmitter output at 50 Ω ≥ 5 W
at 10.0 V operating voltage ≥ 2 W
(emergency mode)
Frequency tolerance ≤ 15 ppm
Duty cycle 1:4 (Min)
Type of modulation A3E amplitude modulation
Modulation factor ≥ 70% to ≤ 99% (dynamic
compressor)
INSTALLATION AND OPERATION
AR 4201 - ( )
Page 1-4
23-10-01 December 15/95

Table of Contents