5 Ca li bra ting the tem pe ra tu re sen sor
a If no tem pe ra tu re sen sor is con nec ted, this mode is skip-
ped when the mode key is pres sed.
b Ca li brat ion is only ne ces sa ry if the sen sor has been re tro-
spec ti ve ly fit ted or re pla ced.
c Af ter cal ling up using the MDE key, the fol lo wing dis play
ap pe ars.
Top line SF 5
Bot tom line Mea su red tem pe ra tu re
d Mea su re the am bient air tem pe ra tur of the sen sor by me-
ans of a suit ab le ther mo me ter and set tem pe ra tur dis play
on the LCD. To this mea su red va lue by mean of the kHz
fre quen cy se lec tor. The en try is sto red by pres sing the
STO key and of the tem pe ra tu re sen sor is ca li brat ed .
6 Set ting ad dres sa ble sto ra ge lo ca tions 1 to 99.
a Call up the functi on using the MDE key. The fol lo wing
dis play then ap pe ars.
Top line SF 6
Bot tom line 1 to 99
b The num ber of the sto ra ge chan nel bet ween 1 to 99 can
be se lec ted as re qui red using the kHz switch and sto red
by pres sing the STO key. If the num ber of sto ra ge chan-
nels is li mit ed and if chan nels out si de the li mit ed area
have al rea dy been used, the se can no lon ger be cal led
up. The data in the chan nels out si de the area con ti nu es
to re main sto red and it can be re-used at any time by
lif ting the re stric ted area.
7 Set ting the tem pe ra tu re dis play in the °C or °F.
a If no tem pe ra tu re sen sor is con nec ted, this mode is skip-
ped when the mode key is pres sed.
b Call up functi on SF 7 using the MDE key. The fol lo wing
dis plays ap pe ar :
Top line SF 7
Bot tom line °C of °F
c The re qui red dis play is se lec ted using the kHz switch and
the se lec ti on is sto red by pres sing the STO key.
IN STAL LA TI ON AND OPE RA TI ON
AR 4201 - ( )
Page 3-13
23-10-01 De cem ber 15/98
To Next Page
Loading...
