Becker AR 4201 - Switching on the Scan Function; Setting the Hold Time in the Scan Function (Only Displayed, if SF8 Is Activated); Inhibiting the Frequency Setting (Channel Selection Only)

8 Swit ching on the scan functi on
a If the SF8 scan functi on is not ac ti vat ed, than the functi on
SF9, SF13 and SF14 will not be dis play ed.
b Call up functi on SF 8 using the MDE key. The fol lo wing
dis play ap pe ars.
Top line SF 8
Bot tom line OFF or On
c Se lect the re qui red functi on using the kHz switch and
sto re the se lec ti on by pres sing the STO key.
OFF = scan functi on off
On = scan functi on on
9 Set ting the hold time in the scan functi on (only dis play ed, if
SF8 is ac ti vat ed).
a Call up functi on SF 9 using MDE key. The fol lo wing dis-
plays ap pe ar :
Top line SF 9
Bot tom line 0 .0 to 60.0
b The hold time can be set as re qui red bet ween 0,0 ..0,9
se conds using the kHz se le tor switch and bet ween 0..60
se conds using the MHz se lec tor switch. The set va lue is
sto red by pres sing the STO key.
10 In hi bi ting the fre quen cy set ting (chan nel se lec ti on only).
a Call up functi on SF 10 using the MDE key. The fol lo wing
dis plays ap pe ar :
Top line SF 10
Bot tom line OFF or On
b Se lect the re qui red functi on using the kHz key and sto re
the functi on by pres sing the STO key.
OFF= Fre quen cy set ting not pos si ble. The VHF trans cei-
ver can only work on the fre quen cies sto red in the in di vi-
dual chan nels.
On = Fre quen cy set ting pos si ble (stan dard set ting).
IN STAL LA TI ON AND OPE RA TI ON
AR 4201 - ( )
Page 3-14-
23-10-01 De cem ber 15/98