EasyManua.ls Logo

Becker CentralControl CC41 - Page 17

Becker CentralControl CC41
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Caution
If the system is controlled by one or more transmitters,
the system’s range of travel must always be visible dur-
ing operation.
Keep packaging materials such as film away from chil-
dren. Misuse can create the risk of suffocation.
Switch the control unit off immediately if the mains ad-
apter and the plug to which it is connected is burnt or
damaged. If a mains adapter is damaged, replace it with
an original one. A faulty mains adapter must not under
any circumstances be repaired.
Switch the control unit off immediately if the housing of
the control unit is damaged, or if liquids have penet-
rated.
Attention
Do not let any objects fall onto the control unit.
If a display is present, protect it against being scratched
by hard objects (e.g. rings, fingernails, wristwatches)
Wait until the control unit has adjusted to ambient tem-
perature before connecting the control unit to the mains
adapter. Condensation that could lead to a short circuit
can be caused inside the control unit by large differ-
ences in temperature and air humidity.
17-en

Related product manuals