The central control unit’s full home automation functional-
ity is naturally available even when it is not connected to a
network. However, some additional functions and access
options are only possible with network or Internet access.
To be able to use these functions, please ensure that the
central control unit is connected to your network, that
there is an Internet connection and that the time is set cor-
rectly. The central control unit can only be integrated in a
network by means of WiFi/WLAN if the WPA2 encryption is
switched on at the router. Please note that this may result
in charges depending on your Internet provider’s contrac-
tual conditions.
Cleaning
Only clean the device with a suitable cloth. Do not use aggressive cleaning agents that
may damage the surface.
Technical data
Supply voltage 230 V/50 Hz
Degree of protection IP 20
Permissible ambient temperature and air humid-
ity
0°C to +40°C at a relative humidity
of between 20% and 80% (non-
condensing)
Maximum emitted transmission power ≤ 100 mW
Radio frequency 868.3 MHz/2.4 GHz/5 GHz
Integrated WLAN 802.11 b/g/n/ac
Ethernet 100/1000 Mbit
Dimensions (W x H x D) 115 x 115 x 25 mm
The maximum transmitter range on and in the building is up to 25m, and up to 350m in
the open.
22-en
To Next Page
Loading...
