Name: Beckett NX
Brand: Beckett
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Instruction Manual – Model NX Oil Burner

Beckett

Contents

Prepare before installing

Verify specifications……………………………….……………………………………... 3

Be aware of hazard definitions.…………….…………….…..………………………… 3

Check certifications/approvals………………………………………………………….. 3

Notice special requirements………………….…………...……………………………. 3

Prepare burner & site

Inspect/prepare installation site……………………...…………………………………. 4

Prepare burner……………………………...…..………………………………………... 5

Check retention head alignment……………………………………………………….. 6

Check/adjust “Zero” calibration……….…………………………………………….….. 6

Set head/air adjustment plate position………………………………………………… 7

Adjust, pipe, & wire burner

Mount burner on appliance………………………………..……………………………. 8

Connect fuel lines………………………………………………………………………… 8

Wire burner………………………………………………………………………….……. 9

Start up & adjust burner

Start up burner/set combustion………..……………..….…………………………….. 10

Set combustion with instruments…………..………….……………………………….. 10

Service & maintain burner

Perform regular maintenance…………………..……….……………………………… 10

To replace the blower wheel………………………..…………………………………... 10

Replacement parts……………………………………………………………………….. 11

Owner’s information……………………………………………………………………… 12

Owner service and maintenance……………………………………………………….. 12

Warranty…………………………………………………………………………………... 12

Table 1 – Air Tube Combination (ATC) codes

Firing rate

(gph)

ATC codes for usable air tube lengths:

(min-max)

Head

5” 7” 9”

0.40-1.35 9-SLOT NX50LB NX70LB NX90LB

0.40-1.35 6-SLOT NX50LC NX70LC NX90LC

Beckett NX Instruction Manual

Other manuals for Beckett NX