Beckhoff BC8050 User Manual

Programming
BC8050 und BC815048 Version: 3.0.0
Note
Show associated variables
If you do not know the address of the Bus Terminals that you have assigned to the local
PLC (BX/BCxx50):
Perform your hardware configuration in the System Manager. After you have entered all the
Bus Terminals and PLC variables, click with the right mouse button on the BX/BCxx50 in
the hardware tree, and select the menu item Export variables information.... A file is saved,
and this file can be inserted in the System Manager under Project - Import. Now you will
have the entry TwinCAT import under the global variables, and you will find here all the
variables that you have assigned to the local PLC (BX/BCxx50).
5.7 Mapping the Bus Terminals
The precise assignment of the byte-oriented Bus Terminals may be found in the configuration guide for the
particular bus terminal. This documentation is available on the Beckhoff Products&Solutions CD or on the
Internet under http://www.beckhoff.de.
Byte oriented Bus Terminals Bit oriented Bus Terminals
KL15x1 KL10xx, KL11xx, KL12xx, KL17xx, KM1xxx
KL25xx KL20xx, KL21xx, KL22xx, KL26xx, KL27xx, KM2xxx
KL3xxx
KL4xxx
KL5xxx
KL6xxx
KL7xxx
KL8xxx
KL9110, KL9160, KL9210, KL9260

Beckhoff BC8050 Specifications

General

Brand	Beckhoff
Model	BC8050
Category	Controller
Language	English