To Next Page

To Previous Page

Programming

BC8050 und BC815056 Version: 3.0.0

Controller Version Firmware

BC3150 BC5150 BC5250 BC8150 -

FB_BasicPID - B0 B0 B1 B0 -

- - - - - - -

File Access Version Firmware

BC3150 BC5150 BC5250 BC8150 -

FB_ReadFromFile - - - - -

FB_WriteToFile - - - - -

FB_ReadWriteFile - - - - -

Memory Functions Version Firmware

BC3150 BC5150 BC5250 BC8150 -

MEMCMP B0 B0 B1 B0 -

MEMCYP B0 B0 B1 B0 -

MEMMOVE B0 B0 B1 B0 -

MEMSET B0 B0 B1 B0 -

NOVRAM Functions Version Firmware

BX3100 BX5100 BX5200 BX8000 -

- - - - - - -

SFC Version Firmware

BC3150 BC5150 BC5250 BC8150 -

AnalyzeExpression - - - - -

AppendErrorString - - - - -

SFCActionControl - - - - -

System / Time / TBus Version Firmware

BC3150 BC5150 BC5250 BC8150 -

DRAND B0 B0 B1 B0 -

SYSTEMTIME_TO_DT B0 B0 B1 B0 -

DT_TO_SYSTEMTIME B0 B0 B1 B0 -

GetSysTick B0 B0 B1 B0 -

PresetSysTick B0 B0 B1 B0 -

Reboot B0 B0 B1 B0 -

Debug Version Firmware

BC3150 BC5150 BC5250 BC8150 -

F_ReadDebugTimer B0 B0 B1 B0 -

F_StartDebugTimer B0 B0 B1 B0 -

5.12.2 Seriell_Set data structure

The RS232-specific function blocks enable specific serial parameters to be set in the default configuration of

the BC8150. It is therefore possible to set the length of the I/O data, the baud rate, and the transfer mode

from the local PLC project. The function block is not required for the TwinCAT configuration, as in this case

the settings are created via the System Manager.

Brand	Beckhoff
Model	BC8050
Category	Controller
Language	English

Beckhoff BC8050 User Manual

Table of Contents

Questions and Answers:

Beckhoff BC8050 Specifications

Related product manuals