Commissioning/Configuration
USB Transfer time-out:
Options: 5 sec / 10 sec / 20 sec
Defines the timeout time for the control, bulk and interrupt transfer
Device reset time-out
Options: 10 sec / 20 sec / 30 sec / 40 sec
Defines the timeout time for the USB mass storage device.
Device Power-up delay
Options: Auto / Manual
Defines the permissible delay until a device has registered with the host controller.
Auto: Uses a default value of 100 ms for a root port, and a value defined by the hub for a hub port.
CX51x0 63Version: 1.6
To Next Page
Loading...
