TwinCAT library and programming
EL6631-0010 59Version: 3.4.0
st_IM_Descriptor:STRING;(*I&M3*)
st_IM_Signature:STRING;(*I&M4*)
END_VAR
bBusy: When the function block is activated this output is set. It remains set until a feedback is received.
While Busy = TRUE, no new command will be accepted at the inputs.
bError: In the event of an error during the command transfer, this output is set once the bBusy output has
been reset.
iErrorID: Supplies an ADS error number when the output bError is set.
st_IM_TagFunction: label read out for the function of the device.
st_IM_Taglocation: label read out for the installation site of the device.
st_IM_Date: Supplies the date of installation of the device in the format.
st_IM_Descriptor: Returns the manufacturer description stored for the device.
st_IM_Signature: Returns the manufacturer signature stored for the device.
Development environment Target platform PLC libraries to be linked
TwinCAT v2.11.0 R3 PC or CX (x86, ARM) TcProfinetDiag.Lib
To Next Page
Loading...
