Beckhoff XPlanar User Manual

For your safety
14 ─── Version: 1.0XPlanar
2.2
General safety instructions
This chapter provides you with instructions on safety when handling
the product. This product is not capable of stand-alone operation
and is therefore categorized as an incomplete machine. The product
must be installed in a machine or plant by the machine manufac-
turer. Read the documentation prepared by the machine manufac-
turer.
2.2.1Before operation
Danger from magnetic fields
Magnetic fields on individual components of the XPlanar unit pose a
risk to:
• people fitted with cardiac pacemakers
• persons with magnetically conducting implants
• implanted and external defibrillators
• magnetic data storage devices, chip cards with magnetic strips
and other electronic devices
Maintain a safety distance to all magnetic parts and prevent direct
contact between magnetic parts and parts that are sensitive to inter-
ference.
Observe the requirements of BGV B 11 for electromagnetic fields
(Germany) and applicable national regulations in other countries.
Follow the Mover handling instructions
The risks due to magnetic fields referred to above particularly relate
to handling of the movers. The movers can be attracted uncontrol-
lably by contact with magnetic objects. Read the chapter on "Me-
chanical installation", [Page43] before handling the movers.
Keep the immediate environment clean
Keep your workplace and the surrounding area clean. Ensure safe
working.
Shut down and secure the machine or plant
Shut down the machine or plant. Secure the machine or plant
against being inadvertently started up.
Do not use damaged components
Adhere to the specifications from the technical data for storage,
transport and operation. Do not use damaged components.
Check safety pictograms
Check whether the designated pictograms are on the product. Re-
place missing or illegible stickers.
Observe tightening torques
Mount and repeatedly check connections and components, comply-
ing with the prescribed tightening torques.
Correctly ground electrical components or modules
Avoid electric shocks due to improper grounding of electrical compo-
nents or modules. Ground all conductive components according to
the specifications in the chapters "Electrical Installation" and "Me-
chanical Installation".

Beckhoff XPlanar Specifications

General

Brand	Beckhoff
Model	XPlanar
Category	Control Systems
Language	English