Commissioning
Version: 1.0 ───
79XPlanar
10.3
Prerequisites during oper-
ation
• Pay attention to atypical noise development
• Pay attention to smoke development
• Always check drive surfaces and cables for dirt, leaks, moisture
or dust
• Check temperature development
• Observe recommended maintenance intervals
• Check function of safety devices
10.4
After operation
WARNING
Ensure safe condition of the machine / system
Make sure that all movers come completely to a standstill.
Movers on vertical tracks can move uncontrollably or fall off the
system when the controller is disabled or the 100-240V power
supply is disconnected, causing serious injury.
To Next Page
Loading...