Need help?Do you have a question about the Beckman Coulter Cytomics FC 500 and is the answer not in the manual?
General| Brand | Beckman Coulter |
|---|---|
| Model | Cytomics FC 500 |
| Category | Laboratory Equipment |
| Language | English |
Outlines hazards, warnings, cautions, and important notes for instrument operation.
Defines the Cytomics FC 500 as an in vitro diagnostic device for cell analysis.
Details the instrument's physical controls, indicators, and components.
Introduces fundamental procedures for using the instrument and its components.
Step-by-step guide for starting the Cytomics FC 500 system daily.
Instructions for properly shutting down the instrument at the end of the day.
Configuration settings necessary for obtaining consistent and reliable QC results.
Automates application setup and QC monitoring for multiple applications.
Specifies the minimum sample volume and cell concentration for analysis.
Procedure for processing samples using the MCL in automatic mode.
Guidelines for reviewing acquired sample data for accuracy and interpretation.
Explains how samples move through the flow cell and the focusing process.
Details how voltage pulse signals from sensors are amplified and analyzed.
Information on laser safety, warnings, and general hazard awareness.
Lists error messages, their causes, and recommended actions.
Discusses the bar code symbologies used for specimen identification.
Guidelines for correctly applying bar code labels to sample tubes.
Details requirements for bar code label size, thickness, and print quality.
To Next Page
