Beco BP109C - Cooling & Heat Pump Model Control Panel

Local Air-conditioner / User Manual
33 / 396 EN
4 Appearance and functon of control panel
4.2 Coolng & Heat pump model (reversble)
Timer Mode Speed
F
1 2 3 4 5 6 7 8 9
10 11
E D C B A
1080 hours is recommended for the HEPA filter using.
1. When the accumulated time of the purification sensor is switched on for 1080 hours, the “HEPA 13
filter indicator” flashes to remind the replacement of a new HEPA filter
2. Reset: After HEPA is replaced, long press the TIMER button 5 seconds to confirm the reset. At this
time, the “HEPA 13 filter indicator” stops flashing and the time is reset again.
C
Note:
• Please keep HEPA 13 filter stored in well conditioner when you don’t use it on
product. Otherwise, HEPA life time would be affected and shorten usage time.
• When HEPA 13 filter is taken out from product / package for 1 year or more, we
suggest to replace with new HEPA 13 filter for better air cleaning performance.
• Suggested working hours depends on room size, air quality environment etc.
Timer Mode Speed
F
1 2 3 4 5 6 7 8 9 10
12 11
13
E D C B A
A Power on/off 4 Heating
B Fan speed 5 Fan
C Temperature up 6 Wireless function
D Temperature down 7 Zone follow
E Operation mode 8
Hepa 13 filter indicator
(present on BP113H only)
F Timer on/off 9 Auto swing
10 Low fan speed
1 Sleep mode 11 Medium fan speed
2 Cooling 12 High fan speed
3 Dehumidifying 13 Water full