6 / 92 EN
HomeWhiz Function / User Manual
10.
Once your connection between AC and your selected home network is established, you will
need to do the same on your mobile device. If your mobile device has not set up the connection
automatically, you need to go to wireless network settings on your mobile device and connect
to the same network as the AC.
11.
On the HomeWhiz app, enter a name for your AC. You can see the appliance you added on the
“Appliances” tab.
1.2 Usng the AC on multple devces
You can use more than one mobile device to control your air conditioner. This requires installing
HomeWhiz also on the second mobile device. You will be prompted to sign in with your account when
you open the app.
If you are signed in with the same account you added the appliance, you can start using your air
conditioner right after signing in.
If you want to create and use a new account with an already configured mobile AC.
Follow the steps below if you want to create and use a new account with an already configured mobile AC.
1.
Create a new account to sign in with to HomeWhiz app. Make sure your mobile device and your AC
are on the same network.
2.
On the Appliances tab, tap “Add/Remove Appliance”. You can see the appliances along with the
owner information at the bottom of the “Other Appliances” tab.
3.
Tap the (+) icon next to the AC you want to add, then enter a name for your appliance.
4.
This sends an e-mail to the owner about your request. Once the owner approves it, you can start
using the appliance together.
C
Note:
After installation is complete, your mobile device and your air conditioner do not need
to be connected to the same network. You can use your appliance as long as your
mobile device has internet connection.
Too see appliances paired with your account, tap “Add/Remove Appliance” from the
“Appliances” tab on the app. Here, you can assign appliances to users.
1 HomeWhz functon
To Next Page
Loading...
