Then the client with MAC address “00:00:00:00:00:01” will be assigned an IP address of
192.168.1.64 through DHCP.
4.2 WAN Settings
To enjoy the surfing, we should have the most basic configuration of the router at first. In this
chapter, you can set the basic network parameters required to access the Internet.
The router supports the following three common means to access:
Dynamic IP access: ISP (such as China Telecom) assigns IP address to users via DHCP.
Static IP access: ISP provides a static IP address to users.
PPPoE dial-up access (ADSL): use PPPoE virtual dial-up connection to the Internet.
4.2.1 Channel configuration
Go to Setup->WAN page, scroll to bottom & go to WAN interface table & select PPPoE change
the settings as per requirement &click modify.
To Next Page
Loading...