LAN ACL Switch
you can enable or disable the ACL function on LAN side. If it is disabled, all hosts on LAN
side can access the services which your router provides. If it is enabled, only the hosts on the
ACL list can access the specify services.
IP Address
the IP address of the host, if the IP is 0.0.0.0, it means any IP.
Service Allowed (LAN side)
the allowed services which the host can access. It can be “any”, or any specified service, such
as “web”, ”telnet”, ”ftp”, ”tftp”, ”snmp” and “ping”. If select “any”, it means the host can
access all the services the router provides.
If the direction is WAN, there are some different settings with LAN side.
To Next Page
Loading...