14
Language
The user can set a different display language. Available languages: ITALIAN, GERMAN and
ENGLISH.
Outputs OUT1 - OUT2 - OUT3 on/off
The user can enable or disable one or more outputs to signal errors in the system.
Outputs OUT1 - OUT2 - OUT3 Active Open/Closed
Once enabled, outputs can be set in N/C or N/A mode; "N/C” means the output will open if an
error occurs; "N/A" means the output will close if an error occurs.
DC
RELAY
C C POWER
SUPPLY
12. . 24 V
To Next Page
Loading...
