5
OPERATIONS REQUIRED TO MAKE THE LOGICA FM
CONTROL UNIT OPERATIONAL
KEYBOARD AND DISPLAY FUNCTIONS
Keys allow you to navigate through pages on screen to view information and select operating
modes.
The three main menus are LUMINAIRES, MAINTENANCE AND STATUS;
- to move from one menu to another, use the "DOWN"
C
and "UP"
D
keys
- to enter the menu and go deeper, use the "OK"
B
key
- to return to a higher menu level, use the "ESC”
A
key
Other functions of the keys are listed below:
Use the “DOWN”
C
and “UP”
D
keys to change a value (for example, in the Date and Time
Settings menu, with the hour indication “08” flashing, press
D
to increase the value to “09”,
press
C
to decrease the value to “07”) and press the “OK”
B
key to confirm the entered
value (by reference to the example given at the previous point: if, after changing the hours value
to “07”, you press the
B
key, the value will be stored on the Control Unit).
Note: If the panel is brand-new or if its memory has been reset (the Control Unit has no lumi-
naires stored), some menus will not be visible.