Need help?Do you have a question about the Beghelli LOGICA and is the answer not in the manual?
General| Type | Control Unit |
|---|---|
| Series | LOGICA |
| Input Voltage | 230 Vac |
| Output Current | 1 A |
| Frequency | 50-60 Hz |
Details the core tasks the Logica FM Control Unit performs, including monitoring and control.
Continuously monitors luminaires and signals any malfunctions.
Allows adjustment of luminaire brightness and performance of functional/autonomy tests.
Tracks system operations and test outcomes, with options for printing or saving.
Instructions for connecting and terminating RS 485 lines, including impedance adaptation.
Guide to navigating screens and selecting operating modes using the control unit's keys.
Step-by-step instructions for setting the current date and time on the control unit.
Procedure to activate the wizard for searching and detecting luminaires in the system.
How to set dates, times, and intervals for functional and autonomy tests on emergency luminaires.
Detailed steps for assigning luminaires to one or multiple groups for differentiated operations.
Options within the Luminaires Menu for adjusting brightness levels.
Access to perform manual tests on emergency luminaires within the Maintenance Menu.
Commands to disable, enable, or permanently turn off luminaires in an emergency state.
Options for performing simultaneous or staggered autonomy tests on luminaires.
How to print configuration, scheduling, errors, and reports from the control unit.
Options for enabling/disabling outputs and setting their active state (N/C or N/A).
Procedures for searching, deleting, and creating networks for luminaires in the system.
Accessing information about the Control Unit and Logica FM Luminaires.
Important safety warnings, disposal guidelines, and warranty contact details.
To Next Page
